Damanox VG10 - Stainless Damask plate with a core of VG-10
Tax included.
Det är riskfritt att handla hos oss
Tusentals nöjda kunder
Snabb leverans
(3–7 dagar)
Köp nu,
betala senare
Finally, you can make your own knives from scratch with stainless laminated damask!
Realize your vision with 67 layers of damask, with a core of Japanese knife steel VG-10, known from premium kitchen knives, but this steel is produced at a Chinese steel mill.
The pattern you get comes in 4 variations.
We have large plates without embossing, and 3 smaller variants finished with a pattern.
Hardening
The steel is delivered unhardened and ready for drilling, filing and grinding.
Curing temperature 1050-1100 degrees
Tempering: 2x2 hours at 150-250 degrees
Tips and tricks
The steel has hardenable and good edge steel (VG10) surrounded by tough stainless steel that does not harden. This gives you the advantage of a hard edge and a tough blade. It also makes sharpening easy after hardening.
With thin blades, it is advantageous to do the sharpening after hardening because a thinly sharpened blade is very vulnerable to damage, excessive temperature or warping during heating and cooling.
Raindrop, Dragonskin, Beach and Laminar
The three patterns Raindrop, Dragonskin and Beach are embossed in a special press to slightly bend the steel layers so that the differences between layers are revealed when the knife blade is sharpened. Laminar is completely flat and smooth, and it is the basis for the other three unique patterns before pressing. You can use it as is for a topographic parallel line effect, or you can modify the pattern with a hammer or press to create your own pattern.
Do you have any questions?
If you have any more questions about this steel, contact us now!
We look forward to seeing your results!
Feel free to send us pictures of your projects with Damanox!
Vi skickar nästan alla beställningar samma arbetsdag om du beställer före kl. 14.00.
Normal leveranstid: 1–3 arbetsdagar med Bring.
Kunder i norra Norge kan i vissa fall behöva en extra dag eller två.
Spårning:
Du får ett spårningsnummer via e-post så snart paketet har skickats.
100 % nöjdhetsgaranti:
Vi är helt säkra på att du kommer att bli nöjd. Vi är så säkra att vi erbjuder både full retur och returfrakt. Oavsett. Så det är helt riskfritt för dig att beställa nu för att själv inspektera produkten i ditt eget hem och i din egen takt.
Vi lagerför även reservdelar och slitdelar, så att om du har oturen att gå sönder något eller, mot förmodan, slita ut dina bryn, kan dessa enkelt bytas ut.
Enkel retur:
Kontakta vår kundtjänst så skickar vi dig en ifylld returetikett.
Inga frågor – ingen risk
Beskrivning:
Finally, you can make your own knives from scratch with stainless laminated damask!
Realize your vision with 67 layers of damask, with a core of Japanese knife steel VG-10, known from premium kitchen knives, but this steel is produced at a Chinese steel mill.
The pattern you get comes in 4 variations.
We have large plates without embossing, and 3 smaller variants finished with a pattern.
Hardening
The steel is delivered unhardened and ready for drilling, filing and grinding.
Curing temperature 1050-1100 degrees
Tempering: 2x2 hours at 150-250 degrees
Tips and tricks
The steel has hardenable and good edge steel (VG10) surrounded by tough stainless steel that does not harden. This gives you the advantage of a hard edge and a tough blade. It also makes sharpening easy after hardening.
With thin blades, it is advantageous to do the sharpening after hardening because a thinly sharpened blade is very vulnerable to damage, excessive temperature or warping during heating and cooling.
Raindrop, Dragonskin, Beach and Laminar
The three patterns Raindrop, Dragonskin and Beach are embossed in a special press to slightly bend the steel layers so that the differences between layers are revealed when the knife blade is sharpened. Laminar is completely flat and smooth, and it is the basis for the other three unique patterns before pressing. You can use it as is for a topographic parallel line effect, or you can modify the pattern with a hammer or press to create your own pattern.
Do you have any questions?
If you have any more questions about this steel, contact us now!
We look forward to seeing your results!
Feel free to send us pictures of your projects with Damanox!