Glass Clear Casting Epoxy - CCR Epoxy Entropy SuperSap
Tax included.
Here we have it! The casting epoxy of all casting epoxies. Want to make river tables, shaft blanks, pen turning blanks, other turning blanks, cast coins, insects or whatever? Want a starter kit, or information about additional equipment? See our epoxy starter kit .
This is what you need to know about CCR SuperSap:
- Can be cast in thick layers with slow hardener
- Flowable and easy to mix
-
Bubbles from the mixture come out easily. Can be used without vacuum and pressure chambers
- Cures slowly, and you can choose between two different hardeners
- Can be used up to 25mm and a few liters at a time (recommended 500ml)
- Can be used up to 50mm
- Fast hardener: Working time 60 min, dry after 24 h, post-curing 7 days
- Slow hardener: Working time 360 min, dry after 72 h, post-curing 7 days
- Recommended temperature approx. 25 degrees for good bubble release and curing time
- Resistant to yellowing and UV radiation
- Can be used for many things!
- Mix with our pigments and colors , or keep it crystal clear!
- Can also be used for micarta!
- Not made for outdoor use, but many have used it outdoors with good results, for example on tables. Should avoid direct sunlight due to heat build-up and wear from UV radiation.
- Sold as a set of both resin and hardener which totals the number of kg stated, e.g. 0.71kg. Note that the liter marking is an approximation, not entirely exact.
- Weight and volume may seem a bit arbitrary, but the reason is that they are produced based on the weight of resin, for example 5.00 kg plus 2.15 kg is 7.15 kg in total.
- Can also be purchased in our starter kit which includes everything you need to cast glass clear epoxy
- Also read our guide on how to mix epoxy properly to prevent problems with sticky epoxy .
Tips for use:
- Measure and Mix: For best results, measure mixing ratio by weight (or carefully by volume in mixing cup) according to the product mixing ratio as shown on the bottle. Always measure, even if you are going to use everything.
- Mix thoroughly: Stir and mix the product thoroughly, making sure to scrape the sides and bottom of the mixing cup several times to achieve an even mixture of resin and hardener.
- Control temperature and humidity: Use the product in a controlled temperature environment within the recommended product specification. For best results, avoid high humidity and cold environments, such as bathrooms, damp unfurnished basements, or cold garages.
- Prepare the surface: For optimal adhesion, the surface must be dry and free of dirt, grease and oil. Matt sanding the surface with sandpaper before application is highly recommended for better adhesion.
- Get to know each other, do tests: We always recommend doing small tests with the epoxy and the materials you plan to use beforehand. This helps you understand how the product works, cures and reacts in relation to your work environment, the other products you will be using and how to achieve the desired result before mixing together hundreds or thousands of kroner worth of epoxy.
- Safety: Wear gloves and safety glasses to avoid skin contact. Ensure good ventilation, both during mixing and curing. It is advisable to wear a mask with an organic filter to avoid inhaling any vapors if ventilation is not sufficient.
Mixing ratio : 2:1 (Resin:Hardener) by volume and 100:43 Resin:Hardener by weight.
That means, for example, 5L Resin and 2.5L hardener, or 8 kg resin and 3.44kg hardener.
Sold as a complete set, the number of liters is the total (resin + hardener). If you need only one of the parts, please send us a message.
What else do I need?
For example, to get started you can buy these things, we also offer this as a starter kit for epoxy .
GLASS CLEAR EPOXY FOR ART, CASTING AND FILLING
Entropy CCR is a glass-clear (crystal clear) and thin-flowing epoxy. It is intended for use in casting, filling and baking in and completely covering various objects. When used with porous materials, it is recommended to apply a thin layer that hardens first, to avoid air bubbles leaking out. High transparency (water-clear) makes it well suited for covering or baking in colored objects and surfaces. This is a special epoxy that has been developed for casting crystal clear and thick layers.
Entropy CCR gives you an incredible amount of possibilities to create and make whatever you want. You can mix in color pigments and various fillers that create amazing effects. Here, only your imagination sets the limits.
LARGE RANGE OF USE
CCR is self-leveling and cures to a glass-like surface. When using the slow hardener, thick layers of epoxy can be applied and high and impressive structures can be created. CCR has good resistance to UV rays and thus provides good color stability.
SAFE USE
- Keep in a ventilated room where the air is changed frequently or has an exhaust fan, and where any spills can be controlled and unauthorized persons cannot come into contact with the product or product residues.
- If the work area is not adequately ventilated, wear a mask with an organic filter to be safe.
- Protect all parts of the body from contact with resin and hardener (skin, hair, eyes, etc.)
- After completion work, wash the surfaces that have been touched, including the cured product. Feel free to use acetone or alcohol to remove any uncured epoxy. Wet wipes can also be useful for wiping surfaces.
- Always wear a mask when sanding and other processing.
If you follow these 5 rules, most of the work is done, and you can use most epoxy systems safely! But that does not exempt you from reading the safety data sheet. Happy casting!
Read more about safe use of epoxy and how to read safety data sheets here
Fantastisk produkt, blank og null bobell!!! Anbefaler for det stark!!! Det er andre gang jeg bruker til mine prosjekter. Kvaliteten er ultimark!👌👍
Denne er veldig enkel å arbeide med til små prosjekter. Jeg bruker den til støping i silikonformer, for å støpe små detaljer til julekuler, og det fungerer supert😃
👍
Jeg er meget fornøyd med CCR ClearCastingEpoxy Resin. Det blir nesten ikke luftbobler i den. Jeg kommer ikke til og kjøpe annen apoxy! Anbefales!
Nå har jeg handlet epoxy herifra x antall ganger. Er så utrolig fornøyd med den, veldig lett og jobbe med i tillegg til minimalt med bobler 😍 Storbua skal ha skryt for utrolig god kundeservice og kommunikasjon, ikke minst rask frakt. Jeg anbefaler virkelig Storbua og produktene de tilbyr. Bildet viser noe av de siste tingene jeg har laget.
Jeg er veldig fornøyd med Storbua sin resin, den herder raskt med rask herder og det er veldig lite bobler i den, jeg trenger faktisk ikke bruke varmepistol eller noe annet for å poppe dem. Resultatet blir veldig blankt og fint og resinet er fint å blande med både mica pulver og forskjellige typer flytende tilsetning. Anbefales.
