1075 (C75S)
Tax included.
Det är riskfritt att handla hos oss
Tusentals nöjda kunder
Snabb leverans
(3–7 dagar)
Köp nu,
betala senare
The Good Old
With the 1075, it's hard to go wrong. It hardens easily, is cheap, is tough and is often used in damask and laminated sheets. With its relatively simple construction, the 1075 also has the advantage of easy maintenance of the egg. 1075 does the job without hesitation and is a good working steel that is also suitable for beginners in the knifemaking profession.
Note: Some of the variants have a note that they are slightly curved, that is, they have been slightly curved after being cut from a larger plate. This is completely normal, but we try to deliver as flat items as possible, so we therefore mark the variants that have an arch. It can, for example, be 3mm curved over a length of half a metre.
| Carbon | Silicon | Manganese |
|---|---|---|
| 0.75% | 0.33% | 0.75% |
Austenitizing Temp: 830-860C (1530-1580F)
Cooling: Oil, for example Rapeseed oil or Quench 50
Tanning:
Get in touch with questions!
Vi skickar nästan alla beställningar samma arbetsdag om du beställer före kl. 14.00.
Normal leveranstid: 1–3 arbetsdagar med Bring.
Kunder i norra Norge kan i vissa fall behöva en extra dag eller två.
Spårning:
Du får ett spårningsnummer via e-post så snart paketet har skickats.
100 % nöjdhetsgaranti:
Vi är helt säkra på att du kommer att bli nöjd. Vi är så säkra att vi erbjuder både full retur och returfrakt. Oavsett. Så det är helt riskfritt för dig att beställa nu för att själv inspektera produkten i ditt eget hem och i din egen takt.
Vi lagerför även reservdelar och slitdelar, så att om du har oturen att gå sönder något eller, mot förmodan, slita ut dina bryn, kan dessa enkelt bytas ut.
Enkel retur:
Kontakta vår kundtjänst så skickar vi dig en ifylld returetikett.
Inga frågor – ingen risk
Beskrivning:
The Good Old
With the 1075, it's hard to go wrong. It hardens easily, is cheap, is tough and is often used in damask and laminated sheets. With its relatively simple construction, the 1075 also has the advantage of easy maintenance of the egg. 1075 does the job without hesitation and is a good working steel that is also suitable for beginners in the knifemaking profession.
Note: Some of the variants have a note that they are slightly curved, that is, they have been slightly curved after being cut from a larger plate. This is completely normal, but we try to deliver as flat items as possible, so we therefore mark the variants that have an arch. It can, for example, be 3mm curved over a length of half a metre.
| Carbon | Silicon | Manganese |
|---|---|---|
| 0.75% | 0.33% | 0.75% |
Austenitizing Temp: 830-860C (1530-1580F)
Cooling: Oil, for example Rapeseed oil or Quench 50
Tanning:
Get in touch with questions!
